How to Replace Weather Stripping on Your Home’s Doors

As colder weather sets in, replacing worn-out weather stripping can go a long way in keeping your home warm and your heating costs down. Drafts from air leaks can make your home feel chilly and drive up energy bills, but sealing those gaps is simple and effective. Weather stripping around doors often wears out over time, so fall is the perfect season to check it and replace it if needed. Whether you live in a house in Denver or a home in Atlanta, here’s a step-by-step guide to help you get the job done and keep your space as efficient and cozy as possible.”

What does weather stripping do?

Weather stripping acts as an invisible shield for your home. It seals the small gaps around doors and windows that often let in drafts, moisture, and even insects. By closing these cracks, weather stripping helps regulate indoor temperatures, making your home more comfortable year-round. It’s a simple, inexpensive way to improve your house’s efficiency.

Types of weather stripping

There are numerous variations of weather stripping, all with their own distinct pros and cons. Here are some of the most common varieties you’ll find.

Tools needed to replace weather stripping

Replacing the weather stripping on your doors is a relatively simple DIY project. Here’s what you’ll need:

• Measuring tape
• Scissors
• Sponge or rag
• Screwdriver or drill

How to replace weather stripping on your doors

Here’s a general step-by-step guide to replacing your home’s existing weather stripping. Keep in mind that weather stripping comes in many varieties, so the actual installation process may vary. Be sure to check the instructions provided by the manufacturer.

1. Remove the old weather stripping

The first step in replacing your home’s weather stripping is to remove the old one. This is usually a simple process that involves either peeling the old weather stripping off of the door or removing the screws that are holding it in place. 

If your doors don’t have any weather stripping, you can skip this step and start fresh.

2. Prep the surface

Once the old weather stripping is off, the next step is cleaning the door where the new one will be installed. This is especially important if adhesive was used before, as leftover residue can weaken the new strip’s bond.. A sponge and some soapy water should do the trick. Thoroughly dry the area after cleaning.

3. Measure and cut the new weather stripping for your doors

Once you’ve removed the old weather stripping, it’s time to install the replacement. Lay the new strip along the edge of the door and carefully measure it against the length you need. Use a utility knife or heavy-duty scissors to make clean, precise cuts. Precision is key as the strip needs to fit snugly without leaving gaps. Taking the time to cut each piece accurately will make the installation smoother and create an effective seal

4. Install the new weather stripping on the doors

With the pieces cut to size, begin attaching the weather stripping along the door frame. Some types come with adhesive backing, just peel and press firmly into place. Others may require small nails, staples, or a tension fit, depending on the style you’ve purchased. Make sure the strip is flush in corners and pressed securely along the full length.. A properly installed strip will create a seamless barrier that keeps the outside air where it belongs.

5. Test the seal to ensure a tight fit

Once the weather stripping has been installed, close your door to make sure the fit is snug and there aren’t any visible gaps. The whole point of weather stripping is to insulate your home and improve its energy efficiency, so it’s important to ensure that it’s been installed properly. 

Weather stripping FAQ

Why is it important to replace old weather stripping?

Over time, weather stripping can wear out, crack, or lose flexibility, leaving your home vulnerable to drafts and higher utility bills.

How often should weather stripping be replaced?

Check it annually for signs of wear. Most types last two to three years, but high-traffic doors may need replacement sooner.

Should I replace weather stripping myself or call a pro?

Because installing weather stripping is a relatively simple project, you can usually do it yourself without much trouble. If you’re willing to pay for labor or don’t feel comfortable with DIY projects, feel free to call in the professionals.

The post How to Replace Weather Stripping on Your Home’s Doors appeared first on Redfin | Real Estate Tips for Home Buying, Selling & More.